NRS Super Pump kayak SUP board raft - $25 (puget, Bellingham)

NRS Super Pump kayak SUP board raft 1 thumbnailNRS Super Pump kayak SUP board raft 2 thumbnailNRS Super Pump kayak SUP board raft 3 thumbnailNRS Super Pump kayak SUP board raft 4 thumbnail
condition: new
make / manufacturer: NRS
model name / number: Super Pump
Up for sale is a a brand new never used NRS Super Pump. Great for Kayak, Paddle Board or any other durable flotation device.

NRS Super Pump Blue (80016.02.100) Single Action Inflation Pump up to 20 PSI

The NRS Super Pump is ideal for inflating iSUPs and inflatable kayaks. An affordable high-pressure pump that’s perfect for inflation up to 20 psi with ease. Fits in most kayak and inflatable SUP carry bags. Works with both the Leafield C7 and the standard SUP Halkey-Roberts inflatable valves.

Built-in pressure gauge takes the guesswork out of inflating your boat, kayak or board.
This low-volume, two-hand pump lets you inflate to pressures up to 20 psi.
You get double-action pumping (inflate on both up and down motions) when you have the red plug screwed into the air port in the top cap. This allows you to quickly put the majority of the air volume in your inflatable.
When you need higher pressure, simply open the air port by removing the red plug and you can bear down with single-action strokes!
Small diameter pump chamber keeps the pumping easy, even at high pressures.
Full 48″ long hose comes with the twist-on Leafield C7 Valve Adapter (# 38523.01) that locks into the valve securely, even at high pressures.
Also included is a valve adapter that will lock into Halkey-Roberts New Short Valves and Summit 2 Valves. To install it, loosen the hose clamp and remove the C7 Adapter. Insert this alternate adapter and tighten the hose clamp.
The aluminum shaft, sturdy handle and tough polypropylene housing are built to withstand lots of use.
Use the Super Pump to fill and/or top off your inflatable, then reverse the hose for deflating at the end of the day.
Each single-action stroke puts out 0.48 gallons (1.8 liters) of air. In double-action mode you get 0.96 gallons (3.6 liters) with every full stroke.
Note: The gauge gives you a reading while you’re actively pumping. Once you stop pumping the valve’s sealing surface closes and the gauge is no longer in contact with the chamber’s pressure.

0.48 gal. (1.8 liters) per single-action stroke
0.96 gal. (3.6 liters) per double-action stroke
Action: Inflate and deflate
Pump Dimensions: 2.75″ Dia. x 25″ H
Chamber Dimensions: 2.75″ Dia. x 18.5″ H
Hose Length: 48″
Leafield C7 adapter
Halkey-Roberts New Short / Summit 2 adapter
Built-in 30 psi (2.0 bar) pressure gauge

post id: 7750109556



best of [?]